artikelnummer / part number : 82 306 050 029 datum / date : 2007-01-24 bezeichnung : description : 0603 esd ultra low cap tvs smd size: 0603 a mechanische abmessungen / dimensions : size (unit : mm) b elektrische eigenschaften / electrical properties : technical data working max. clamping trigge r leakage esd puls e esd voltage v oltage v oltage v oltage curren t withstand air discharge dc v (*1) va (*2) kv (*3) pf 82306050029s1 5 30 typ. 150 0.01 >100 +/-15 0.2 * 1 max. clamping voltage at 8/20 waveformand 1 a pulse current * 2 leakage current at max operating voltage, the max leakage current was measured at reliability test capacitance measured at: 1mhz * 3. esd typ. withstands voltage design and method guarantee this property capacitance/frequency dc to & 1.8 ghz design and specifications are subject to change without notice reference data response time t rise <1 ns operating ambientg temperature -40 +85 storage temperature -50 +125 max. temperature solder 260/10s other data body zno end termination ag/ni/sn packaging reel complies with standard iec61000-4-2 procedure solgel marking none w rth elektronik eisos gmbh & co.kg - radialex department d-74638 waldenburg max-eyth-stra?e 1 - 3 germany telefon (+49) (0) 7942 - 945 - 0 telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com rohs compliant part number capacitance spezifikation fr freigabe / specification for release kunde / customer : sise w l t a 402 0.5 1.0 0.6 0.25 603 0.8 1.6 0.9 0.3 805 1.25 2.0 1.2 0.3 1206 1.6 3.2 1.5 0.5 1210 2.5 3.2 1.5 0.5 1812 3.2 4.5 2.0 0.5 2220 5.0 5.7 2.5 0.5
artikelnummer / part number : 82 306 050 029 bezeichnung : description : 0603 esd ultra low cap tvs smd size: 0603 c l?tpad / soldering spec. : recommended solder pad layout (unit : mm) 1 - the solder paste shall be printed in a thickness of 150 to 200 m. 2 - the sir test of the solder paste shall be done based on jis-z-3284 3 - ir reflow pb free process suggestin profile (based on j-std-020-c): 4 - soldering recommend paste is sn 96.5/ag 3.5 - preheat 1.the temperature rising speed is suggested to be 2~3 /s. 2.appropriate preheat time will be from 60 to 120 seconds. 3.temp. maintain at 175 +/-25c 120 seconds. - heating 1.careful about sudden rise in temperature as it may worsen the solder ability. 2.set the peak temperature in 235 10-20s or 260c 3-10s. - cooling 1.ramp down rate 6c/s max. perform adequate test in advance as the reflow temperature profile will vary according to the conditions of the manufacturing process, and the specification of the reflow furnace 4 - wave soldering process ramp-up rate 3c/s max. temp. maintain at 175 +/-25c 180 seconds max. peak temperature 260c 3-10s. ramp down rate 6c/s max. to thermal shock, a preheat is recommended in the soldering process. and the peak temperature should be under controlled rigidly in the solder process. 5 - hand soldering process preheating 150c temperature of soldering iron tip 380c max. 3 to 5 sec the varistorrs shall be cooled gradually at room ambient temperature 6 - ultrasonic cleaning for preventing failures or damages. frequency 29mhz max - radied power 20w/l max - period 5mn max w rth elektronik eisos gmbh & co.kg - radialex department d-74638 waldenburg max-eyth-stra?e 1 - 3 germany telefon (+49) (0) 7942 - 945 - 0 telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com rapid heating, partial heating or rapid cooling will easily cause defect of the component. so preheating and gradual cooling pr ocess is suggested. ir soldering has the highest yields due to controlled heating rates and solder liquidus times. make sure that the el ement is not subjected to a thermal gradient steeper than 3 degrees per second. 2 degrees per second is the ideal gradient. during the solde ring process, pre- heating to within 175 degrees of the solders peak temperature is essential to minimize thermal shock. kunde / customer : spezifikation fr freigabe / specification for release time (mn) temperature (c) 250 75 100 125 150 175 200 225 01:00:00 25 02:00:00 03:00:00 04:00:00 peak temp. 260c (3 to 10sec) peak temp. 175c (60 to 120sec) peak temp. 245c (10 to 20sec) 275 time (mn) temperature (c) 250 75 100 125 150 175 200 225 01:00:00 25 02:00:00 03:00:00 04:00:00 peak temp. 260c (3 to 10sec) preheat. 175c 150sec max. 275 sise a b c d 402 0.4~0.6 1.0~1.8 0.6~0.7 0.6~1.2 603 0.8~1.2 1.7~3.0 1.2~1.6 0.9~1.8 805 1.0~1.5 2.1~3.8 1.5~2.1 1.1~2.3 1206 1.8~2.5 3.0~5.8 1.8~2.6 1.2~3.3 1210 1.8~2.5 3.2~6.1 2.8~3.8 1.3~3.5 1812 2.5~3.5 4.0~7.3 3.3~4.5 1.5~3.8 2220 3.5~4.6 5.0~8.5 5.2~6.2 1.5~3.9 3220 5.2~6.4 9.5~10.8 5.6~6.0 2.0~2.8
artikelnummer / part number : 82 306 050 029 bezeichnung : description : 0603 esd ultra low cap tvs smd size: 0603 d rollenspezifikation / tape and reel specification : 1 - carrier tape and transparent cover tape should be heat-sealed to carry the products, and the reel should be used to reel the carrier tape. 2 - the adhesion of the heat-sealed cover tape shall be 40 20/ 15grams. 3 - both the head and the end portion of the taping shall be empty for reel package and smt auto-pickup machine. and a normal paper tape shall be conected in the head of taping for the operator to handle. (unit : mm) tape specification (unit : mm) http://www.we-online.com w rth elektronik eisos gmbh & co.kg - radialex department d-74638 waldenburg max-eyth-stra?e 1 - 3 germany telefon (+49) (0) 7942 - 945 - 0 telefax (+49) (0) 7942 - 945 - 400 kunde / customer : spezifikation fr freigabe / specification for release symbol a 0 b 0 k 0 t 2 t d 0 d 1 p 1 p 2 p 0 w e f 0.10 0.10 0.10 0.05 0.05 +0.10 0.05 0.10 0.05 0.05 0.20 0.10 0.05 -0.00 402 0.85 1.25 0.65 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 603 1.05 1.88 0.95 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 805 1.42 2.30 1.04 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1206 1.88 3.50 1.27 0.2 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1210 2.18 3.46 1.45 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1812 3.66 4.95 1.74 0.25 0.10 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 2220 5.10 5.97 2.80 0.25 0.10 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50
artikelnummer / part number : 82 306 050 029 bezeichnung : description : 0603 esd ultra low cap tvs smd size: 0603 d rollenspezifikation / tape and reel specification : (unit : mm) reel dimension (unit : mm) * 2.0 mm for 361 and 391 * 2.5 mm for 431 and 471 quantity per packing unit w rth elektronik eisos gmbh & co.kg - radialex department d-74638 waldenburg max-eyth-stra?e 1 - 3 germany telefon (+49) (0) 7942 - 945 - 0 telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com spezifikation fr freigabe / specification for release kunde / customer : symbol a b c d e w w 1 402 178.01.0 60.00.5 13.00.2 21.00.2 2.00.5 9.00.50 1.50.15 603 178.01.0 60.00.5 13.00.2 21.00.2 2.00.5 9.00.50 1.50.15 805 178.01.0 60.00.5 13.00.2 21.00.2 2.00.5 9.00.50 1.50.15 1206 178.01.0 60.00.5 13.00.2 21.00.2 2.00.5 9.00.50 1.50.15 1210 178.01.0 60.00.5 13.00.2 21.00.2 2.00.5 9.00.50 1.50.15 1812 178.01.0 60.00.5 13.50.1 21.00.2 2.00.5 13.60.2 1.50.15 2220 178.01.0 60.00.5 13.50.1 21.00.2 2.00.5 13.60.2 1.50.15 type 402 603 805 1206 1210 1812 2220 pcs/reel 10 000 5 000 3 000 3 000 2 000 1 000 1 000
artikelnummer / part number : 82 306 050 029 bezeichnung : description : 0603 esd ultra low cap tvs smd size: 0603 basic test characteristics environmental reliability test high temperature storage step temperature period 1 -403 30min3 2 room temperature 1~2 hours 3 1252 30min3 4 temperature 1~2 hours freigabe erteilt / kunde / customer general release: datum / date unterschrift / signature jp. penlou high temperature load 06-07-31 wrth elektronik jp. penlou new p/n 2006-06-02 jp. penlou operating temp. range 2005-11-30 jp. penlou lead free soldering 2005-11-04 geprft / checked 2006-07-31 kontrolliert / approved jp. penlou name ?nderung / modification datum / date w rth elektronik eisos gmbh & co.kg - radialex department d-74638 waldenburg max-eyth-stra?e 1 - 3 germany telefon (+49) (0) 7942 - 945 - 0 telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com damp heat load/humidity load the specimen should be subjected to 40 2 , 90 to 95 rh environment , and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and humidity for one or two hours. the change of varistor voltage shall be within 10 low temperature storage the specimen should be subjected to 40 2 , without load for 1000 hours and then stored at room temperature for one or two hours. the change of varistor voltage shall be within 10 the specimen shall be subjected to 150 2 for 1000 12 hours in a thermostatic bath without load and then stored at room temperature and humidity for 1 to 2 hours. the change of varistor voltage shall be within 10 . temperature cycle the temperature cycle of specified temperature shall be repeated five times and then stored at room temperature and humidity for one or two hours. the change of varistor voltage shall be within 10 and mechanical damage shall be examined. high temperature load after being continuously applied the maximum allowable voltage at 85 2 for 1000 2 hours, the specimen shall be stored at room temperature and humidity for one or two hours, the change of varistor voltage shall be within 10 . leakage current typical leakage current at 25 50 a characteristic test method and description energy absorption maximum energy which may be dissipated with a specified waveform 10/1000 s.without device failure. typical capacitance device capacitance measured with zero voltage bias 0.5vrms and 1khz surge current maximum peak current which may be applied with the specified waveform 8/20 s without device failure. surge shift v/v the shift of tvs voltage after suffering the specified surge current. varistor voltage with the specified measuring current of 1ma dc applied. max. clamping voltage maximum peak voltage across the tvs measured at a specified pulse current a and waveform 8/20 s. standard test condition environmental condition under which every measuring is done without doubt on the measuring results. unless specially specified, temperature, relative humidity are 5 to 35 , 45 to 85 rh. max. working voltage maximum steady-state dc operating voltage the device can maintain and typical leakage current at 25 not exceed 50 a. e testbedingungen / test conditions : test method/description kunde / customer : spezifikation fr freigabe / specification for release
|
